Can A Plunge Router Be Used On A Router Table?
In the router world, the plunge router has become a favorite tool for cabinetmaker and woodworker.
In router tables, you have two choices: a traditional router table, which requires you to manually raise and lower your routers on an arm that is adjusted by hand on the tabletop.
Or a router table that mounts your router on a shaft that is adjusted by hand on the tabletop.
So, what is a plunger router?
The Plunge Router is used on a router table. And if you’ve done any woodworking in the past decade, you’ve probably seen a router table.
A plunge router is a router that uses a plunge mechanism to adjust the depth of cut. Plunge routers can be used with router tables.
A plunge router works by using a rotating cutter head to move along the surface of the material while making cuts. The plunge router can be mounted onto either a router table or a drill press.
Using a plunge router requires very little skill but is also difficult when you are working at home with no help.
You might felt frustrated because even though your hands feel like they are doing what they should do, there isn’t much feedback given by them.
While the router is one of the most common tools in a woodworker’s arsenal, it can actually be a bit intimidating if you don’t have one.
Don’t worry – this article will show you exactly how to use a plunge router, and you can create some amazing furniture projects right away.
Let’s start!
How to use a plunge router with a table?
A plunge router is an excellent tool for cutting small parts. It can be used on its own or in combination with other tools such as a saw, jigsaw, band saw, drill press.
When you try to cut something out of wood, metal, plastic etc., you need some kind of visual confirmation if you’ve done it correctly. This is where the plunge router comes into play.
A plunge router works best when you put it down on a flat surface and start operating the handle. The depth change knob lets your router set up the desired amount of material removal.
Make sure that you make adjustments while the bit is still touching the material and not resting on air. If you let the bit rest on the air, it may cause damage.
In order to adjust the position of the cutter head, the user must push the handle downwards. As soon as the bit touches the wood, vibration starts immediately and continues until the required depth is reached.
This means that you can operate the plunge router motor continuously no matter if you’re making several passes or only removing tiny amounts each time.
A regular plunge router provides plenty of room around the area being worked upon.
For instance, if you were to drill two holes close together, the first hole would be drilled slightly deeper than the second.
There would be enough space leftover to insert the drill bit again.
Four steps to use Plunger Router
In order to use a plunge router with a table, you need to make sure that your router is on a router table.
If you want to make a table using a plunge router, you can follow these steps:
1. First, you need to hold the router and the edge of the table saw cut out, and then insert the router bit into the router.
2. After that, you need to tighten the router and turn on the router. Use the height change to bring the bit down to the level of the table surface.
3. Then, you need to move the router forward until the bushing is touching the surface of the table.
4. Finally, you need to adjust the bit’s height until the cut bit is at the required depth.
Plungers Bit
Plungers come with different bits depending on their intended purpose. You can choose between straight bits and angled bits.
- Straight Bits
Straight bits are drill bits with a straight shank that is used to drill perpendicular holes. It is called a straight bit because the cutting edges run parallel with the length of the bit.
Straight bits come in many sizes and can be used in combination with a drill to create holes of various diameters and depths.
- Angled Bits
Angled Bits are a must-have when working with a sheet of material and a table router. The bit creates a chamfer on both sides of the cut.
Angled bits are a special cutting tool that allows unique cuts into a variety of materials. They come in a variety of sizes and are usually angular.
Advantage of having a Plunge Router
A plunge router is one that is placed directly in your router table and it plunges into your wood to make a cut. They are used for a variety of projects and they can be very helpful.
There are advantages to having one such as less dust, less hassle, and a faster cut.
This craftsman router can be used as a table-mounted router. It also has a variety of built-in features that allow you to use this router as a traditional router. Although this router is a hybrid, it is still an all-in-one router.
There is another advantage of having a plunge router: you can easily change bits without losing accuracy. Just unscrew the old bit and screw in the new one. That’s all. No grinding needed.
Compared to fixed routers, plunge routers are generally easier to use. They reduce the time required to complete a job.
If you have been searching for the best router for your home and are looking to purchase the most affordable craftsman router, then a plunge router kit is the best choice for you.
We recommend giving your plunge router a good cleaning after every job. Otherwise, dust particles accumulate over time and eventually mess things up.
